What Is Near Miss Definition In Safety? And 5 Safety Near Miss Examples

By | December 16, 2023
Near Miss Definition In Safety
Near Miss Definition In Safety

The “Near Miss Definition In Safety” includes a near miss as an unplanned event that didn’t result in injury, illness, property damage, or a harmful environmental impact but has the potential to do so.

Reporting near misses is crucial to avoid unwanted accidents from occurring in the future, as today’s near miss could be tomorrow’s accident.

The “Near Miss Definition In Safety” is an unplanned event that didn’t result in injury, illness, property damage, or a harmful environmental impact but had the potential to do so. A near miss is not an accident, but they could have been accidents if the circumstances had been slightly different. Near miss happens more often than you might think because they are easy to forget.

OR

Near Miss Definition In Safety: Any unwanted event that happens vastly close to a person or property but doesn’t harm them, such as a hammer failing from height but didn’t result in injury or loss.

Near Miss Example: A spanner falls from scaffolding or mobile elevated working (MEW) platforms & hits the ground below but doesn’t result in injuries or property damages.

Safety Near Miss Examples
Safety Near Miss Examples

Near-Miss:

A workman drops a spanner off a scaffolding platform, which falls a distance of 10m to the ground, landing only 2 feet away from other task operatives. It’s a near-miss incident. No accident took place, no injury. The spanner was returned to the workplace, and everyone could continue their tasks with the same spanner.

Immediate And Route Cause:

Missing toeboards or gaps in the scaffolding platform.

Following the near-miss report, It was found that the scaffolding platform was inspected, and there was a missing toeboard where the hammer slipped and fell through. This unsafe condition was immediately rectified to prevent other materials from falling off the scaffold and causing severe accidents in the future.

It’s clear that without a near-miss reporting system, not even top management may be aware of the hammer dropped unless they witnessed it. If it’s not rectified next time, some other materials may fall through that open gap & someone at ground level might be hit or even killed.

Management can review the situation and take preventive action through a near-miss report to avoid reoccurrence. In this case, preventive action would include ensuring all toeboards are properly fixed & there are no gaps in the scaffold platform. Before signing the scaffold tag, the competent scaffold inspector must inspect the scaffold structure properly.

Near-Miss:  

One person was about to hit a projected component of the scaffolding platform, which was observed during the site inspection. The person didn’t get injured but had the potential to be injured after hitting the projected component of the scaffolding platform.

The concerned supervisor was immediately called to get it modified as soon as possible.

Immediate And Route Cause:

The projected scaffolding component was left in an unsafe condition.

The scaffolding inspector couldn’t observe the projected component of the scaffold structure, which was in unsafe condition & had the potential to cause harm.

Near-Miss:

A worker trips over scattered or trailing cable across the pedestrian walkway. He was about to fall and get injured, but somehow, he balanced his body and kept walking without any injury.

Immediate And Route Cause:

Scattered or trailing cables on the pedestrian walkways.

Following the near-miss report, a workplace assessment was carried out, which showed that several trailing cables were routed across the pedestrian walkways, and some of them were not even in use and could have been routed safely by using cable hangers and removing unwanted cables from the work site.

Near Miss
Near Miss

Near-Miss:

One crew (consisting of five workers) is conducting maintenance of the chain conveyor without isolating the chain conveyor from energy sources. Fortunately, No personal injury or property damage is reported, But it has the potential to cause severe injury or even death if the conveyor has energized accidentally.

Immediate And Route Cause:

The conveyor was not isolated from energy sources before commencing its preventive maintenance.

Following the near-miss report, It was found that the conveyor was isolated from the energy source as per the work permit, but it was not isolated physically. The chain conveyor could have accidentally started and led to serious personal injury.

Concerned job supervisors and safety officers must ensure that equipment is isolated from energy sources adequately before commencing preventive maintenance. Conduct the equipment maintenance only if it is completely isolated from the energy sources.

Near-Miss:

A site engineer steps into the puddle on the walk around the work site. He asks the concerned supervisor to clean it up. He does, and he walks around the work site continues without harm.

Is this called a near-miss? It may not seem like a near-miss event. But in other circumstances, someone could have slipped and been injured.

Immediate And Route Cause:

Puddle on the walkways.

Following the near-miss report, it’s found that a minor leak in the roof light above is causing the puddle in case of heavy rain. The roof is fixed to prevent the issue from getting worse & remove the slipping hazard.

The “Near Miss Definition In Safety” and five simple safety near miss examples have been explored in this article for clear understanding. Near reports can provide ideas for a more severe issue. The valuable information reported can be used to prevent severe accidents from occurring because of bad practices.

Implementing corrective action following the near miss will not only protect the safety of your workplace but also improve the worker’s morale, which can safely boost productivity. All near misses must be reported on time to avoid reoccurrence.

Q: What Is Near Miss Definition In Safety?

Ans: The “Near Miss Definition In Safety” is an unplanned event that didn’t result in injury, illness, property damage, or a harmful environmental impact but had the potential to do so. A near miss is not an accident, but they could have been accidents if the circumstances had been slightly different.

Q: What Are The Safety Near Miss Examples?

Ans: A workman drops a spanner off a scaffolding platform, which falls a distance of 10m to the ground, landing only 2 feet away from other task operatives. It’s a near-miss incident. No accident took place, no injury. The spanner was returned to the workplace, and everyone could continue their tasks with the same spanner.

A worker trips over scattered or trailing cable across the pedestrian walkway. He was about to fall and get injured, but somehow, he balanced his body and kept walking without any injury.

Q: Why Near-Miss Must Be Reported?

Ans: All near-misses must be reported to avoid future accidents.

Leave a Reply

Your email address will not be published. Required fields are marked *